KU UP 2325 A, Up Converter
KU UP 2325 A, Up Converter KU UP 2325 A, Blockdiagramm

KU UP 2325 A, Up Converter

2300 ... 2500 MHz

The converter KU UP 2325 A is designed for radio link systems in the range from 2300 MHz to 2500 MHz. It features a high frequency stability and high linearity. High spurious rejectionis achieved by internal band pass filters. There is no need for additional external filters! Typical applications are radio link systems or digital video transmissions using DVB-T and DVB-S. Together with the power amplifier KU PA 230250-20 B an output power of more than 20 watts CW can beachieved.
Lead time on request
Frequency range (IF)597 ... 797 MHz
Frequency range (RF)2300 ... 2500 MHz
LO frequency1703 MHz
LO accuracy @ 18 °C+/- 2 ppm
LO frequency stability+/- 3 ppm
Phase noise @ 1kHztyp. -95 dBc/Hz
Phase noise @ 10 kHztyp. -98 dBc/Hz
Phase noise @ 100 kHztyp. -110 dBc/Hz
Gaintyp. 17 dB, min 15 dB
Maximum input powermax. 5 mW (+7 dBm)
Output power (P1dB)typ. 50 mW (+17 dBm)
Supply voltage+12 ... +14 V DC
Current consumptiontyp. 240 mA
Input connector / impedanceSMA-female, 50 ohms
Output connector / impedanceSMA-female, 50 ohms
Casemilled aluminium
Dimensions (mm)126 x 64 x 22
Weight310 g
  • Low phase noise oscillator
  • High frequency stability of the oscillator
  • High linearity
  • Reverse polarity protection
  • Digital broadcast systems (DVB-T, DVB-S)
  • Analog and digital transmission systems
  • Multichannel Multipoint Distribution Service (MMDS)


One of the critical key components of a wireless system is the low-noise amplifier (LNA). The LNA, usually connected close to the antenna, takes the weak radio-frequency (RF) signal from the antenna and amplifies it. The main function of the pre amp is to increase the amplitude of the receiving signal without adding much noise and distortion, in other words, to nearly maintain the signal to noise ratio (SNR)  of the desired RF signal.  The main characteristics of the low noise preamplifier are noise figure (NF), gain, and linearity. KUHNE electronic provides a variety of high quality low-noise and ultra low-noise amplifiers, covering frequency bands L, S, C, X, K, frequency selective and broadband. The functional bandwidth varies from several MHz to about 20 GHz. The website-filter on the product page can be used to refine your search results by frequency range, gain, noise figure and supply voltage. The broad portfolio of KUHNE RF LNAs offers high performance including low noise figure (NF), high gain, high linearity and small power consumption, therewith supports the customers in many different use cases and scenarios, e.g., high and low bandwidth applications, in commercial usage as well as for lab experiments and research. Several application examples are given as follows: the 2 GHz UHF broadband low noise amplifier KU LNA BB 2227 A can be used in the RF front end of a multitude of wireless standards in the ISM band, like UMTS, bluetooth, radar, or 2.4 GHz Wi-Fi, e.g., supporting the communication and video transportation in sports events. Another example is the 5-6 GHZ RF linear preamp KU LNA 5059 A, which is needed in IEEE 802.11a/n/ac Wi-Fi systems operating in the 5.1-5.85 GHz range. Other applications like Automatic Dependent Surveillance Broadcast (ADS-B): KU LNA 1090-2 A, Multichannel Multipoint Distribution Service (MMDS): KU LNA BB 2227 A, Radio astronomy: KU LNA 142 AH, Satellite Communication (Satcom) systems: KU LNA 152 AH and so on can be found in the product descriptions. KUHNE electronic also focuses on the dynamic demands of markets and provides most up-to-date customized solutions. We offer low-noise amplifiers (LNAs) with special features, such as different connector types (SMA, N, Waveguide, and many more), remote power supply via coaxial cable, waterproof cases and so on. Our professional RF products and components enable optimum measure, test, and field application experience.