KU LNA BB 8001200A, Broadband Low Noise Amplifier
8000 … 12000 MHz
Analog & digital transmission systems Measurement and laboratory equipment Communication systems
The KU LNA BB 8001200 A is KUHNE's latest low-noise broadband preamplifier and was developed as a preamplifier or driver amplifier for use in confined spaces. Due to its compact design, it can be used flexibly and, thanks to its noise figure (NF) of typ. 3 dB and its 1 dB compression point (P1dB) of typ. 27 dBm, it is suitable for a variety of applications in the X-band.
Analog & digital transmission systems Measurement and laboratory equipment Communication systems
Driver amplifier for X-band power amplifiers
- Low noise figure
- High output power with typ. 0.5 W P1dB
- Small mechanical dimensions
- Reverse polarity protection
The KU LNA BB 8001200 A is KUHNE's latest low-noise broadband preamplifier and was developed as a preamplifier or driver amplifier for use in confined spaces. Due to its compact design, it can be used flexibly and, thanks to its noise figure (NF) of typ. 3 dB and its 1 dB compression point (P1dB) of typ. 27 dBm, it is suitable for a variety of applications in the X-band.
Lead time on request
Technical specifications
Frequency range | 8000..12000 MHz |
Noise figure @ 18 °C | typ. 3 dB, max. 4 dB |
Gain | typ. 30 dB |
Gain flatness | typ. +/- 2 dB |
Maximum input power | 10 mW |
Output power (P1dB) | typ. 27 dBm |
Output IP3 | typ. +31 dBm |
Input return loss (S11) | typ. 10 dB, min. 8 dB |
Output return loss (S22) | typ. 9 dB, min. 6 dB |
Supply voltage | +9 ... 15 V DC |
Current consumption | typ. 230 mA |
Operating case temp. range | -40 ... +65 °C |
Input connector / impedance | SMA-female, 50 ohms |
Output connector / impedance | SMA-female, 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 28.7 X 19.3 X 8.4 |
Weight | 15 g (typ.) |
Description
The KU LNA BB 8001200 A has a bandwidth of 8 GHz to 12 GHz, covers the entire X-band microwave range and thus enables many possible applications. For example, the KU LNA BB 8001200 A can be used as a low-noise preamplifier for receivers with moderate to high input powers, as a driver amplifier for X-band power amplifiers and as a signal amplifier for laboratory applications. With a gain of typically 30 dB, signals up to a power of almost 1 mW can be amplified linearly.
Features
- Low noise figure
- High output power with typ. 0.5 W P1dB
- Small mechanical dimensions
- Reverse polarity protection
One of the critical key components of a wireless system is the low-noise amplifier (LNA). The LNA, usually connected close to the antenna, takes the weak radio-frequency (RF) signal from the antenna and amplifies it. The main function of the pre amp is to increase the amplitude of the receiving signal without adding much noise and distortion, in other words, to nearly maintain the signal to noise ratio (SNR) of the desired RF signal. The main characteristics of the low noise preamplifier are noise figure (NF), gain, and linearity. KUHNE electronic provides a variety of high quality low-noise and ultra low-noise amplifiers, covering frequency bands L, S, C, X, K, frequency selective and broadband. The functional bandwidth varies from several MHz to about 20 GHz. The website-filter on the product page can be used to refine your search results by frequency range, gain, noise figure and supply voltage. The broad portfolio of KUHNE RF LNAs offers high performance including low noise figure (NF), high gain, high linearity and small power consumption, therewith supports the customers in many different use cases and scenarios, e.g., high and low bandwidth applications, in commercial usage as well as for lab experiments and research. Several application examples are given as follows: the 2 GHz UHF broadband low noise amplifier KU LNA BB 2227 A can be used in the RF front end of a multitude of wireless standards in the ISM band, like UMTS, bluetooth, radar, or 2.4 GHz Wi-Fi, e.g., supporting the communication and video transportation in sports events. Another example is the 5-6 GHZ RF linear preamp KU LNA 5059 A, which is needed in IEEE 802.11a/n/ac Wi-Fi systems operating in the 5.1-5.85 GHz range. Other applications like Automatic Dependent Surveillance Broadcast (ADS-B): KU LNA 1090-2 A, Multichannel Multipoint Distribution Service (MMDS): KU LNA BB 2227 A, Radio astronomy: KU LNA 142 AH, Satellite Communication (Satcom) systems: KU LNA 152 AH and so on can be found in the product descriptions. KUHNE electronic also focuses on the dynamic demands of markets and provides most up-to-date customized solutions. We offer low-noise amplifiers (LNAs) with special features, such as different connector types (SMA, N, Waveguide, and many more), remote power supply via coaxial cable, waterproof cases and so on. Our professional RF products and components enable optimum measure, test, and field application experience.