KU PA 600770-2 A, RF Power Amplifier
6000 ... 7700 MHz • 2 W
| Frequency range | 6000..7700 MHz |
| Input power for P1dB | max. 10 dBm |
| Maximum input power | +15 dBm |
| Output power P1dB | typ. 33 dBm, min. 32.5 dBm (CW) |
| typ. 2 W, min. 1.8 W (CW) | |
| Output power P3dB | typ. 34.8 dBm, min. 34 dBm (CW) |
| typ. 3 W, min. 2.5 (CW) | |
| Output power COFDM (1) | typ. 26 dBm, min. 24 dBm |
| typ. 400 mW, min. 250 mW | |
| Gain (small signal) | typ. 28 dB, min. 26 dB |
| Gain flatness (small signal) | typ. +/- 1.5 dB |
| Harmonic rejection | min. 25 dB @ 31.7 dBm |
| IM3 (2) | min. 25 dBc @ 30 dBm PEP |
| Efficiency | typ. 10 % @ 33 dBm PEP |
| Input return loss (S11) | typ. 10 dB |
| Supply voltage | +12 ... 14 V DC |
| Quiescent current | typ. 1.2 A |
| Current consumption | max. 1.7 A |
| Forward detection | yes (diode detector) |
| Operating case temp. range | -20 ... +55 °C |
| VSWR of load | max. 1.8 : 1 |
| Input connector / impedance | SMA-female / 50 ohms |
| Output connector / impedance | SMA-female / 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 50 x 30 x 18 |
| Weight | 45 g (typ.) |
| (1) | Measured with QAM 64, single carrier, EVM: 2% |
| (2) | Measured 2-tone, frequency spacing: 1 MHz |
- GaAs-FET-technology
- High linearity (class A operation)
- High bandwidth
- Monitor output for forward power detection (DC voltage)
- Reverse polarity protection
- Small mechanical dimensions
- Low power applications
- Measurement and laboratory equipment
- Analog and digital transmission systems
- Amateur radio
