KU PA 640720-10 A - RF Power Amplifier
6400 ... 7200 MHz • 10 W
Technical specifications
Frequency range | 6400..7200 MHz |
Input power for P1dB | typ. 3 dBm, max, 7 dBm |
Maximum input power | +10 dBm |
Output power P1dB | typ. 40 dBm, min. 39 dBm (CW) |
typ. 10 W, min. 8 W (CW) | |
Output power COFDM (1) | typ. 30 ... 34.7 dBm |
typ. 1 ... 3 W | |
Gain (small signal) | typ. 39 dB, min. 36 dB |
Gain flatness (small signal) | typ. +/- 2 dB |
Noise figure @ 18 °C | typ. 5 dB NF |
Harmonic rejection | min. 35 dB @ 39 dBm |
IM3 (2) | typ. 30 dBc @ 37 dBm PEP |
typ. 20 dBc @ 40 dBm PEP | |
Efficiency | typ. 18 %, min. 13 % @ 39 dBm (CW) |
Input return loss (S11) | typ. 10 dB |
ON voltage | +5 ... 14 V DC |
Supply voltage | +12 ... 14 V DC |
Quiescent current | typ. 4.5 A |
Current consumption @ P1dB | typ. 4.5 A |
Forward detection | yes (diode detector) |
Operating case temp. range | -20 ... +55 °C |
VSWR of load | max. 1.8 : 1 |
Input connector / impedance | SMA-female / 50 ohms |
Output connector / impedance | SMA-female / 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 130 x 60 x 20 |
Weight | 270 g (typ.) |
(1) | Measured with QAM 64, single carrier, EVM: 2% |
(2) | Measured 2-tone, frequency spacing: 1 MHz |
Features
- GaAs FET technology
- High linearity (class A operation)
- Reverse polarity protection
- Monitor output for forward power detection (DC voltage)
- ON / OFF control with DC voltage (ON at 5 ... 14 V)
Applications
- Measurement and laboratory equipment
Important notes
Please notice the following:
- The technical specifications refer to room temperature.
- The power amplifier doesn’t contain any coaxial relays.
- The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
- Further information about dimensioning of heat sinks is available on our FAQ site.
Downloads