KU LNA BB 3000 N-TM, Low Noise Broadband Amplifier
10 ... 3000 MHz
- High bandwidth
- Reverse polarity protection
- V2A mounting clamp incl.
- Water-resistant case – perfectly suitable for outdoor operation
The broadband low-noise amplifier KU LNA BB 3000 N-TM was particularly developed by KUHNE for outdoor application. Due to the waterproof housing and the attached mounting clamp, the LNA is perfectly suitable for mounting it directly on the mast and close to the antenna.
Analog & digital transmission systems Test equipment
- High bandwidth
- Reverse polarity protection
- V2A mounting clamp incl.
- Water-resistant case – perfectly suitable for outdoor operation
The broadband low-noise amplifier KU LNA BB 3000 N-TM was particularly developed by KUHNE for outdoor application. Due to the waterproof housing and the attached mounting clamp, the LNA is perfectly suitable for mounting it directly on the mast and close to the antenna.
Lead time on request
Technical specifications
Frequency range | 10..3000 MHz |
Noise figure @ 18 °C | typ. 1.5 dB, max 2.5 dB |
Gain | 25 ... 30 dB |
Maximum input power | 1 mW |
RF input protection | PIN diodes |
Output IP3 | min. +26 dBm, typ. +30 dBm |
Supply voltage | +12 ... 15 V DC |
Current consumption | typ. 150 mA |
Operating case temp. range | -40 ... +85°C |
Input connector / impedance | N-female, 50 ohms |
Output connector / impedance | N-female, 50 ohms |
Case | Case incl. V2A mounting clamp, IP43 |
water resistant case incl. V2A mounting clamp | |
Dimensions (mm) | 115 x 56 x 82 |
Feature | Remote power supply via RF output |
Feature 2 | 3-pin connector MS3102E series for power supply |
Description
The KU LNA BB 3000 N-TM has a bandwidth from 10 MHz to 3000 MHz, making it suitable for a variety of radio-frequency applications. Furthermore, the low noise figure of typically 1.5 dB, the gain of up to 30 dB, and the direct attachment close to the antenna minimize the noise figure of the receiver. Furthermore, the ease of handling is further enhanced by the PIN diode-based reverse polarity protection.
Features
- High bandwidth
- Reverse polarity protection
- Water-resistant case
- V2A mounting clamp
Applications
- Analog and digital transmission systems
- Measurement equipment
Important notes
- Maximum input power 1 mW
- Mating connector type is Amphenol MS3106E10SL-3S, not part of delivery
Downloads
One of the critical key components of a wireless system is the low-noise amplifier (LNA). The LNA, usually connected close to the antenna, takes the weak radio-frequency (RF) signal from the antenna and amplifies it. The main function of the pre amp is to increase the amplitude of the receiving signal without adding much noise and distortion, in other words, to nearly maintain the signal to noise ratio (SNR) of the desired RF signal. The main characteristics of the low noise preamplifier are noise figure (NF), gain, and linearity. KUHNE electronic provides a variety of high quality low-noise and ultra low-noise amplifiers, covering frequency bands L, S, C, X, K, frequency selective and broadband. The functional bandwidth varies from several MHz to about 20 GHz. The website-filter on the product page can be used to refine your search results by frequency range, gain, noise figure and supply voltage. The broad portfolio of KUHNE RF LNAs offers high performance including low noise figure (NF), high gain, high linearity and small power consumption, therewith supports the customers in many different use cases and scenarios, e.g., high and low bandwidth applications, in commercial usage as well as for lab experiments and research. Several application examples are given as follows: the 2 GHz UHF broadband low noise amplifier KU LNA BB 2227 A can be used in the RF front end of a multitude of wireless standards in the ISM band, like UMTS, bluetooth, radar, or 2.4 GHz Wi-Fi, e.g., supporting the communication and video transportation in sports events. Another example is the 5-6 GHZ RF linear preamp KU LNA 5059 A, which is needed in IEEE 802.11a/n/ac Wi-Fi systems operating in the 5.1-5.85 GHz range. Other applications like Automatic Dependent Surveillance Broadcast (ADS-B): KU LNA 1090-2 A, Multichannel Multipoint Distribution Service (MMDS): KU LNA BB 2227 A, Radio astronomy: KU LNA 142 AH, Satellite Communication (Satcom) systems: KU LNA 152 AH and so on can be found in the product descriptions. KUHNE electronic also focuses on the dynamic demands of markets and provides most up-to-date customized solutions. We offer low-noise amplifiers (LNAs) with special features, such as different connector types (SMA, N, Waveguide, and many more), remote power supply via coaxial cable, waterproof cases and so on. Our professional RF products and components enable optimum measure, test, and field application experience.