Technical specifications
Frequency range | 5000..5900 MHz |
Noise figure @ 18 °C | typ. 1.5 dB, max. 1.8 dB NF |
Gain | typ. 27 dB, min. 26 dB |
Maximum input power | 2 mW |
Output power (P1dB) | typ. 19 dBm |
Output IP3 | typ. +27 dBm |
Input return loss (S11) | 11 |
Output return loss (S22) | min. 9 dB |
Supply voltage | +9 ... 30 V DC |
Current consumption | typ. 60 mA |
Operating case temp. range | -40 ... +65 °C |
Input connector / impedance | SMA-female, 50 ohms |
Output connector / impedance | SMA-female, 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 50 x 30 x 17 |
Weight | 50 g (typ.) |
Features
- Low noise figure
- High gain
- High IP3 for good large signal performance
- Very good input return loss (S11)
- Unconditionally stable – no parasitic oscillations in case of poor antenna match
- Static protection (ESD) at preamplifier input
- Solder pin for direct power supply
- Remote power supply via output connector
- Milled aluminium case
- Small mechanical dimensions
Applications
- Digital broadcast systems (DVB-T, DVB-S)
- COFDM systems using modulation types QPSK, QAM
- Analog and digital transmission systems
Important note
- Maximum input power 2 mW
Downloads