KU PA BB 070270-80 A-2.1.1, Power Amplifier
600 ... 2700 MHz • 100 W
- versatile application
- for all common mobile radio bands
- Excellent operational safety thanks to numerous protection and monitoring circuits
analog & digital transmission systems test equipment jamming
- versatile application
- for all common mobile radio bands
- Excellent operational safety thanks to numerous protection and monitoring circuits
Lead time on request
| Frequency range | 600..2700 MHz |
| Maximum input power | +10 dBm |
| Saturation power | min. 49 dBm |
| min. 80 W | |
| Gain (small signal) | typ. 52 dB |
| IM3 (1) | typ. 22 dBc @ 80 W PEP |
| Efficiency | typ. 25 % @ 80 W (CW) |
| Input return loss (S11) | typ. 12 dB, min. 10 dB |
| ON voltage | +5 V DC |
| Supply voltage | + 32 V DC |
| Quiescent current | typ. 2.8 A |
| Current consumption | typ. 13 A, max. 15 A |
| Forward detection | yes (diode detector) |
| Reflected power detection | yes (diode detector) |
| Operating case temp. range | -20 ... +55 °C |
| Input connector / impedance | SMA-female / 50 ohms |
| Output connector / impedance | SMA-female / 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 180 x 95 x 26 |
| Weight | 800 g (typ.) |
| (1) | Measured 2-tone, frequency spacing: 1 MHz |
- GaN technology
- Wide bandwidth
- High gain
- Monitor output for forward power detection
- Monitor output for reverse power detection
- SWR protection
- Power good indication
- Over temperature protection
- Gate Current protection
- CW / pulsed systems
- Laboratory equipment
- Radar
- Jammer
Please notice the following:The technical specifications refer to room temperature.
- The power amplifier doesn’t contain any coaxial relays.
- The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
- Further information about dimensioning of heat sinks is available on our FAQ site.
- The recommended fans need a supply voltage of 24 ... 28 V DC.
