KU PA 440500-25 B, Linearer Leistungsverstärker

KU PA 440500-25 B, Linear Power Amplifier

4400 ... 5000 MHz • 25 W
Lead time on request
Frequency range4400..5000 MHz
Input power for P1dBtyp. 2 dBm
Maximum input power+6 dBm
Output power P1dBmin. 44 dBm (CW)
min. 25 W (CW)
Output power COFDM (1)typ. 40 dBm
typ. 10 W
Automatic level control (ALC)yes (adjustable ALC)
Gain (small signal)typ. 46 dB, min. 42 dB
Gain flatness (small signal)typ. +/- 2 dB
Harmonic rejection min. 48 dB @ 44 dBm
VSWR protectionIsolator
Over temperature protectionyes
IM3 (2)typ. 40 dBc @ 40 dBm PEP
typ. 36 dBc @ 43 dBm PEP
Efficiency typ. 18 % @ 44 dBm (CW)
ON voltage+5 ... 14 V DC
Supply voltage+12 ... 14 V DC
Quiescent currenttyp. 9 A
Current consumptionmax. 12 A
Forward detectionyes (diode detector)
Reflected power detectionyes (diode detector)
Operating case temp. range-20 ... +55 °C
Input connector / impedanceSMA-female / 50 ohms
Output connector / impedanceSMA-female / 50 ohms
Casemilled aluminium
Dimensions (mm)158 x 100 x 20
Weight550 g (typ.)
(1)Measured with QAM 64, single carrier, EVM: 2%
(2)Measured 2-tone, frequency spacing: 1 MHz
  • GaAs FET technology
  • High linearity
  • Low EVM
  • Isolator for protection against high VSWR
  • Adjustable ALC (automatic level control)
  • Reverse polarity protection
  • Over temperature protection
  • Monitor outputs for forward and reverse power detection (DC voltage)
  • Logic ON / OFF control (ON at +5 … 14 V DC)
  • Digital transmission and broadcast systems (DVB, WiMAX)
  • COFDM systems using QPSK, QAM
  • Analog transmission systems

Please notice the following:
  • The technical specifications refer to room temperature.
  • The power amplifier doesn’t contain any coaxial relays.
  • The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
  • Further information about dimensioning of heat sinks is available on our FAQ site.

Accessories